Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Replacement Across Bloomington
Roof replacement in Bloomington runs between $8,500 and $15,500 for a typical single-story ranch home, with architectural shingles landing around $4.90 to $6.70 per square foot installed. Most Bloomington homeowners we talk to aren’t replacing because they want to – they’re dealing with shingles that have baked under inland sun until they curl and shed granules down to bare mat. Ridge Cap Roof Repair works across the 92316 ZIP and the surrounding unincorporated blocks, and we know exactly what these low-pitch mid-century roofs need when the heat finally wins. Call (866) 361-0798 to schedule your free estimate.
Why Ridge Cap Roof Repair Is Bloomington’s Preferred Roof Replacement Company
Bloomington is not Fontana or Rialto. The housing stock here skews older, the lots are tighter, and the sun exposure is relentless. Our crew spends enough time on the east-side tract blocks and the older ranch streets off Valley Boulevard to know the difference between a roof that can be repaired and one that’s already lost its decking to trapped heat. Noel Cardenas built Ridge Cap around a simple order of operations: inspect before we recommend, repair when it makes sense, replace when it doesn’t. That philosophy matters in a working-class community like Bloomington where homeowners deserve an honest answer about whether the decking can survive another decade or the whole system needs to go.
We carry a seven-manufacturer material roster – GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral – so a Bloomington homeowner gets a recommendation driven by their roof’s pitch, their attic ventilation, and their budget, not by whichever single brand we happen to stock. The same crew that inspects your roof is the crew that tears it off and re-sheets it, which means the findings from your inspection never get lost between a salesperson’s notes and a subcontractor’s crew. From the ridge cap down, the details don’t fall through the cracks.
Styles & brands we work with






Flat Roof Replacement in Bloomington
Flat Roof Replacement in Bloomington is a niche job that comes up most often on older additions, enclosed patios, and garage roofs where the original mid-century build used a low-slope or nearly-flat plane instead of a pitched truss system. On these roofs, water doesn’t shed the way it does on a ranch gable – it sits and works at seams, penetrations, and the drain scuppers until the membrane fails. A Bloomington flat roof replacement typically runs $6,800 to $11,200 for a single-ply membrane system on a 400 to 700 square foot plane, with the final number driven by how much of the existing decking needs to come out and whether we’re pulling the old built-up layers off first.
In our experience, flat roofs here fail faster than pitched ones because the intense inland sun beats directly on the membrane with no shade relief, baking the adhesives and sealants until they crack at the flashing points. That heat load is why we recommend inspecting the attic or ceiling cavity under a flat roof before committing to a membrane-only replacement – soft decking changes the scope and the price, and it’s better to know that before we open the roof up.
Membrane Selection for Inland Heat
For Bloomington’s UV-heavy, low-moisture climate, we lean toward white or light-colored TPO and PVC membranes that reflect solar radiation rather than absorbing it the way older black asphalt built-up roofs do. The reflected heat also keeps the attic and the living space underneath cooler during July and August, which matters on a Bloomington afternoon when the valley air is already pushing triple digits.
Decking and Drainage on Flat Planes
A flat roof only works if the water has a way off. On the older Bloomington additions we tear off, we regularly find the original decking sloped the wrong direction – toward the house instead of toward the scupper – or no slope at all. Replacing the decking lets us correct that pitch with tapered insulation or new furring so the replacement roof actually drains, which is the difference between a roof that lasts and a membrane that starts ponding water within two years.
Roof Installation in Bloomington
Roof Installation in Bloomington on a full replacement means tearing the old system down to the sheathing, inspecting every sheet, replacing what’s soft or delaminated, and building the new roof back up from the deck with underlayment, leak barriers, flashing, and shingles or membrane rated for inland heat and UV. For a standard single-story ranch home in the 92316 ZIP, a complete tear-off and architectural shingle installation runs $9,200 to $14,800 depending on roof size, pitch, decking condition, and whether the home needs a ridge vent and soffit intake added to what is usually a badly under-ventilated attic.
What most Bloomington homeowners don’t realize is that the roof installation itself is only half the equation. The other half is the attic ventilation beneath it. Those mid-century ranch roofs that bake in the sun are cooking their own decking from underneath, and without a ridge vent and soffit intake to pull the heat out, the new shingles we install will start aging faster than they should.
Ventilation That Protects the Decking
On nearly every older Bloomington ranch we open up, the attic ventilation is either minimal or missing entirely. Heat gets trapped under the roof deck, the plywood or OSB dries out and warps, and the shingles above it cook from both sides. When we install a new roof here, we spec ridge vent and soffit intake as a system, not an add-on, so the decking we’re laying shingles over isn’t being baked from below.
Wind-Rated Fastening for Santa Ana Season
Bloomington sits in a path where Santa Ana winds push dust and debris through the valley every fall, and loose shingles don’t survive a strong gust event. We nail to the manufacturer’s high-wind pattern on every replacement we install in this area, not because code always requires it, but because the wind events here are predictable enough that the fastening pattern is cheap insurance compared to a blow-off claim.
Trusted Brands We Service in Bloomington
Ridge Cap Roof Repair is material-agnostic. We install and service CertainTeed, Owens Corning, IKO, and Atlas products, among the seven manufacturers on our roster, which means the shingle or membrane we recommend for your Bloomington roof is the one that matches your roof’s pitch, your attic ventilation, and your budget – not whichever brand we happen to be incentivized to push that month. Seven manufacturers, one crew. For Bloomington homeowners, that also means replacement parts and warranty support don’t require chasing a brand we’re locked into. The right material for your roof gets chosen on the ground in Bloomington, not in a showroom.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Replacement Problems We See in Bloomington Homes
- Sun-brittled shingles shedding granules to bare mat. The low-pitch ranch roofs on Bloomington’s east-side tract blocks take direct inland sun for decades, and the asphalt oxidizes until the shingles curl and the granules wash off. By the time you see bare mat, the waterproofing is already compromised.
- Heat-baked sealants and cracked flashing at valleys and penetrations. Without a functioning ridge vent and soffit intake, the attic traps solar heat and bakes the sealants from underneath. The flashing at pipe penetrations and valleys dries out, cracks, and opens a leak path that has nothing to do with the shingles themselves.
- Soft decking under the valleys. On the older Bloomington roofs we tear off, the decking under the valleys is almost always the first place we find soft spots. Water follows the valley lines, and when the old flashing fails, the plywood underneath takes the damage silently for years before the ceiling shows a stain.
- Santa Ana debris packing the valleys and behind the fascia. In the fall, dust and wind-driven debris load into the valleys and get trapped against the fascia, holding moisture against the roof’s edge. Where the drip edge is missing or the fasteners are cheap, that trapped moisture rusts the metal and wicks water back up under the shingles.
Pricing for Roof Replacement in Bloomington, CA
A full Roof Replacement in Bloomington on a standard single-story ranch home runs between $9,200 and $14,800 for architectural shingles, with the price moving on roof size, pitch, decking condition, and ventilation work. Smaller flat roof replacements on additions or garages run $6,800 to $11,200. If the decking needs partial re-sheeting, expect to add $2.80 to $4.20 per square foot for the affected areas. Every estimate we write in the 92316 ZIP is a line-item quote with the tear-off, decking, underlayment, flashing, shingles, ventilation, and haul-off priced separately, so you can see exactly where the money goes. Call (866) 361-0798 to schedule your free estimate – we’ll walk the roof with you and give you a written number.
We Also Serve Cities Near Bloomington
Ridge Cap works on Roof Replacement in Bloomington and the surrounding San Bernardino valley communities, including Fontana, Rialto, Glen Avon, and Pedley. If you’re on the edge of the 92316 ZIP or just across the city line, call (866) 361-0798 and we’ll confirm service coverage for your street.
Serving Bloomington, CA — Our Local Coverage Area
We’re based in the Bloomington area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Replacement in Bloomington
Bloomington’s inland heat and UV exposure bake the asphalt in shingles until it oxidizes and loses its flexibility, which causes the curling and granule loss you see on older low-pitch ranch roofs around the east-side tract blocks and the valley’s older streets. Coastal roofs get marine moisture that helps cool the surface and slows that oxidation process; Bloomington gets almost none of that relief. The fix is a heat-rated shingle spec plus a proper ridge vent and soffit intake system to pull attic heat out before it cooks the decking and the shingles from below. Call (866) 361-0798 and we’ll take a look at your roof’s condition and ventilation.
Yes. Low-pitch roofs shed water slower than steep ones, so the ridge, valleys, and eaves carry more standing moisture during winter rains, and in Bloomington’s summer heat those same areas are the first points where trapped attic heat accelerates shingle failure. We spec ice and water shield in the valleys and along the eaves on every low-pitch replacement we install in the 92316 ZIP, plus ridge vent and soffit intake to bleed off the heat that breaks down the decking. If your roof pitch runs under 3:12, the underlayment spec changes entirely, and that’s something a generic quote often misses. Call (866) 361-0798 for an exact take on your roof’s pitch.
A square is 100 square feet of roof surface, and it’s how Bloomington roofing quotes are priced – the number of squares on your roof multiplied by the per-square rate for tear-off, decking, underlayment, shingles, and installation. A 1,500 square foot single-story ranch typically measures between 16 and 19 squares of actual roof surface depending on pitch and overhang. When we write your quote, we’ll give you the measured square count so you can compare line items against any other bid without getting confused by bundled pricing. Call (866) 361-0798 and we’ll measure your roof for free.
Yes, when they’re nailed to the manufacturer’s high-wind pattern. Bloomington’s fall Santa Ana events push dust and debris through the valley with enough force to peel shingles that were installed with a standard four-nail pattern. We nail every replacement we install here to the six-nail high-wind spec on the Owens Corning, CertainTeed, IKO, and Atlas products in our lineup, and we check the fastening on the existing decking before the new shingles go down. If a wind event does damage a roof we installed, the manufacturer’s wind warranty applies to the shingle system. Call (866) 361-0798 to discuss what your roof’s wind exposure looks like.
The answer depends on what the decking looks like once we tear the old shingles off. On older Bloomington ranch homes, we regularly find soft or delaminated decking under the valleys and along the eaves where water has been wicking for years, and that decking has to come out before new shingles go down. If the decking is solid and only the shingles are spent, a shingle-only replacement works fine. We never know for sure until the roof is opened, which is why our quotes include a per-sheet price for any decking that does need replacing. Call (866) 361-0798 and we’ll give you a realistic picture before any work starts.
Written by Noel Cardenas, Owner at Ridge Cap Roof Repair, serving Bloomington and the surrounding San Bernardino valley.