Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roof Installation Cost in San Bernardino?
Metal roof installation in San Bernardino typically runs $17,500 to $42,000 for a standard single-family home in 2026, with most projects landing around $26,000. That works out to roughly $8.50 to $17.50 per square foot of roof area, installed. The spread is wide because panel type, roof pitch, tear-off, and the oddities of a particular San Bernardino address move the number more than anything a brochure will tell you.
If you’re pricing this out because your asphalt shingles are on their last legs, or because you’re tired of chasing leaks after every Santa Ana wind event, the honest starting point is an inspection. We inspect before we recommend, and the estimate is free. Call (866) 361-0798 and we’ll come look at what’s actually up there.
Metal Roof Installation Cost Breakdown (2026)
The table below reflects what we see on San Bernardino homes in the current market. These are installed prices, meaning materials and labor together, not the price of standing-seam panels on a pallet.
| Line item | Typical $ range | Notes |
|---|---|---|
| Metal roof material (per sq ft) | $3.50 – $9.00 | Galvalume and painted steel on the low end; standing seam and aluminum higher |
| Labor, installation (per sq ft) | $4.00 – $8.50 | Rises with pitch, complexity, and how many penetrations the roof carries |
| Tear-off and disposal of old shingles | $1.50 – $3.50 | One layer is cheaper than three; layered roofs cost more |
| Underlayment and moisture barrier | $1.00 – $2.50 | Synthetic underlayment is standard for metal in this climate |
| Ridge caps, trim, and closures | $500 – $2,200 | More hips and valleys means more trim |
| Flashing and penetrations | $400 – $1,500 | Chimneys, vents, and skylight framing add cost |
| Roof deck repair (if discovered) | $0 – $3,000 | Soft or rotted sheathing gets replaced once the old roof is off |
| Permit fees (San Bernardino) | $300 – $800 | Varies with valuation and roof size |
What pushes a job toward the top of that range? A steep pitch slows everything down and raises labor. A complex roof with many hips, valleys, and penetrations costs more than a simple gable. And a standing seam panel, with its hidden fasteners and continuous long runs, commands a premium over exposed-fastener corrugated steel. If your roof is a straightforward hip-and-ridge design on a single-story home, you’ll land in the lower half of the range.
What Affects Metal Roof Installation Pricing in San Bernardino
San Bernardino sits in a particular pocket of Southern California. Inland heat, dry summers, and the Santa Ana winds that funnel through the Cajon Pass all shape what a roof here has to survive. Here’s what moves the price.
- Panel type. Standing seam runs $12 to $19 per square foot installed. Exposed-fastener panels and corrugated steel run $8 to $13. Stone-coated steel sits in between. The gap is real; it’s fasteners and seam engineering, not cosmetic preference.
- Roof pitch and complexity. A 4/12 pitch is friendly. Anything above 8/12 needs staging, harnesses, and slower work. Every valley and hip adds trim, closures, and cutting time.
- Old roof removal. If we find two or three layers of shingles, tear-off and disposal climb. Sometimes a homeowner knows; often they don’t until the deck is exposed.
- Deck condition. San Bernardino’s dry heat can dry out and crack older plywood sheathing. Once we’re down to the deck, we can see it, and we’ll tell you exactly what needs replacing before it goes back up.
- Roof accessories. Ridge vents, snow guards (rare here, but some owners want them), and the material itself for the ridge cap all add up. The ridge cap is the most exposed detail on the roof, so it’s where material choice actually matters most.
- Access. A roof hemmed in by walls, trees, or narrow side yards means slower material staging. Sometimes it’s the difference between a two-day install and a three-day install.
Is a Metal Roof Worth the Cost in San Bernardino?
Most metal roofs last 40 to 70 years, depending on the material, versus 15 to 25 for asphalt. Over the life of a San Bernardino home, that’s a strong argument. If you’re weighing the long view against the sticker shock, our Metal Roof Installation in San Bernardino page goes deeper on material options and how each one holds up in inland heat.
There’s also a practical, local case. A light-colored metal roof reflects solar heat, and in a San Bernardino summer that’s not a marketing line, it’s a real load reduction on your air conditioner. Homes around the University District and north of Highland are frequently retrofit candidates for exactly this reason; the attic heat those shingles trap is measurable.
One caution worth stating plainly: a metal roof is only as good as the install underneath it. Missing underlayment, improperly installed trim, or a rushed ridge detail is where leaks actually come from. That’s why we handle inspection, repair, and replacement with the same crew: findings made in inspection don’t get lost between teams.
What Drives the Price Up or Down
We’ve already covered the big levers. A few more honest notes:
- Fewer panels, simpler lines, lower price. A simple footprint installs faster and produces less waste. Complex geometry costs money.
- Material choice is the swing factor. The difference between a basic exposed-fastener roof and a standing seam roof on the same house can be several thousand dollars. Both are metal. Both are valid. They’re just engineered differently.
- Timing. In some seasons, a crew’s schedule opens up. Ask about flexibility; it sometimes helps on pricing.
- What we don’t do without seeing it. We won’t quote a deck replacement we can’t see. That number arrives after the tear-off, before any new roofing goes down. You’ll get it in writing and you can decide.
How to Save on Metal Roof Installation
A metal roof is a large purchase, and there’s no honest way to make it small. But there are real ways to keep the number from climbing.
- Get the inspection first. An honest assessment tells you whether you need a full replacement or a targeted repair. Repair when it makes sense. Replace when it doesn’t. Don’t spend $30,000 on a roof that only needed $2,000 of flashing work. Our home page explains how our three services fit together.
- Ask about material tiers. Seven manufacturers means seven product ecosystems and, practically, a range of price points. GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral all make products with different performance and price profiles. Knowing that lets us match the material to your roof and budget rather than steering you to whatever one supplier stocks.
- Bundle trim and closures into the estimate early. Piecemeal trim costs more than trim planned as part of the job.
- Get it inspected before a leak starts. Gutters full of debris, cracked sealant, and a single loose ridge cap are cheap to fix now and expensive in water damage later. We inspect for free, and the estimate is free too. Call (866) 361-0798.
What a San Bernardino Metal Roof Install Actually Looks Like
We inspect before we recommend, so the process starts on the roof, not at a sales table.
- Inspection. We check the deck, the attic, the existing flashing, and the roof’s overall condition. If an honest repair will buy you another five years, we’ll say so.
- Estimate and material match. We walk through the options: panel type, color, and manufacturer. Seven manufacturers, one crew, so the recommendation is based on your roof’s condition and San Bernardino’s climate demands, not a single product line.
- Tear-off and deck inspection. The old roof comes off. Anything soft or rotted gets replaced and documented.
- Underlayment and flashing. This is the part you’ll never see again, and it’s the part that matters most for a leak-free metal roof.
- Panel installation. Panels go down, seams get set, fasteners go in to spec.
- Ridge caps and trim. From the ridge cap down, this is where the work gets checked twice. It’s the highest, hardest-working detail on the roof, and it’s the one most likely to fail if it’s rushed.
Homeowners in the area around Del Rosa and Muscoy often ask about asphalt after storm damage, and metal turns out to be the smarter long-term answer once the numbers are on the table. The same crew that does the inspection does the repair and the replacement, so nothing gets lost in translation.
FAQs – Metal Roof Installation Cost
How much does metal roof installation cost in San Bernardino?
Expect $17,500 to $42,000 for a typical single-family home, with most jobs near $26,000. That translates to roughly $8.50 to $17.50 per square foot installed. Standing seam roofs sit at the high end. Call (866) 361-0798 for a free, no-pressure estimate on your actual roof.
Is it cheaper to repair or replace a metal roof in San Bernardino?
Usually repair. A single failed flashing detail or a lifted panel often costs $400 to $2,500 to fix, far less than a full replacement. But once a metal roof has widespread fastener corrosion or multiple leaks across seams, repair stops making financial sense. We’ll tell you which side of that line you’re on.
Can you install a metal roof over existing shingles in San Bernardino?
Technically possible in some cases. Practically unwise. Over old shingles, you hide the deck, skip a chance to spot rot, and add weight. In a San Bernardino summer, that trapped heat has nowhere to go. We recommend full tear-off, which is why tear-off is a line item in our estimate. Call (866) 361-0798 and we’ll walk you through it.
How long does metal roof installation take in San Bernardino?
Most single-family homes take two to five days. A simple gable roof on a one-story house can finish in two. Add a steep pitch, complex geometry, or a deck that needs repair and it stretches toward a week. We give you a realistic window with the estimate, not a best-case guess.
Do I need a permit for a metal roof in San Bernardino?
Yes. Roofing permit fees here run roughly $300 to $800 depending on valuation and square footage. Permits are part of the estimate we hand you, and we arrange them. If your last roofer “handled it off the books,” that paperwork can become your problem at resale.
Will a metal roof lower my energy bills in San Bernardino?
Often, yes. A reflective metal roof can cut attic heat load noticeably during San Bernardino summers. Actual savings depend on your insulation, attic ventilation, and roof color. We won’t quote a specific percentage because it varies house to house.
Get a Free Estimate on Your Metal Roof
If your roof is aging out, storm-damaged, or leaking after a wind event, the next step is a look. We’ll inspect the roof, tell you what we find, and give you a written estimate. Repair when it makes sense. Replace when it doesn’t. Seven manufacturers, one crew, from the ridge cap down.
Call (866) 361-0798 for a free metal roof installation estimate in San Bernardino.
Pricing reflects the San Bernardino market as of 2026. Ridge Cap Roof Repair offers free estimates – call (866) 361-0798.
What Our Customers Say
"Full replacement after the hail. They handled the insurance adjuster meeting, documented everything, and I did not have to argue with anybody. Crew was here three days and the yard was cleaner when they left than when they started."
— Alejandro Guzman"Went up in the attic first with a flashlight before going on the roof, which no other estimator bothered to do. Found the stain and worked backward from there."
— Rami Khalil"He told me my roof had another five or six years in it and I should not replace it yet. He was standing there with a quote pad in his hand. That's why I'll call him when it's time."
— Adriana Mendoza